Bow | Pressure guide attachment for band saws

- Replaceable razor blades made of micro-grain carbide.
- The razor blades can be rotated by 90° for a total of 4 cutting edges.
- The razor blades are fixed with special Torx screws.
- Cutter body made of high-quality steel.

The cutter is equipped with two double-edged razor blades for rounding the edges. The radius is ground on all 4 sides of the razor for maximum tool efficiency. The cutter is fitted with a razor blade with a radius of R3mm or R2mm, which is mainly used on ABS edges. It is also possible to buy a radius R1mm and R1,5 mm, which can be used to cut the edge when gluing umakarte, veneer or laminate on boards. For use on manual top milling machines.

Surface milling cutters are ideal for fast feed and large material removal rates.

Edge trimming and template-guided shape copying without “waviness” and without the need for sanding. The router bit has a guide bearing at the tip, so it follows the template/edge precisely and maintains the final dimension.

These cutters are designed for trimming, shaping and grooving.

For direct drilling, use type F044.

Suitable for copying using a top template and for edge-guided routing – the bearing holds the path, so you cut to a clean, exact dimension without complicated fence adjustments.

Slotting shank cutter with one drilling razor blade and one cutting razor blade. It has excellent drilling properties in hardwood and board materials (laminate, chipboard, MDF and Corian). The 20 mm diameter shank is designed for safe clamping in CNC machining centres at high feed rates. Can also be used for manual milling.

The milling cutter is equipped with a drilling razor blade, which makes it easier to drill into the material.

Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.