Dovetail router bits

The 101-8 herringbone cutter with an 8 mm clamping shank with a diameter of 12.7 mm and an angle of 10° is designed for semi-covered joints with a board thickness of 16 mm.

112-8 herringbone cutter with 8 mm clamping shank, 12.7 mm diameter and 12° angle for semi-hidden joints.

For more information, see the instructions for use in the table on page 76

120-8 herringbone cutter with 8 mm clamping shank, 12.7 mm diameter and 14° angle for semi-hidden joints.

For more information, see the instructions for use in the table on page 76

128-8 herringbone cutter with 8 mm clamping shank, 12.7 mm diameter and 18° angle for semi-hidden joints.

For more information, see the instructions for use in the table on page 76

The 50-8 herringbone cutter with 8 m clamping shank with a diameter of 6.3 mm and an angle of 8° for board thicknesses of 3-6 mm.

The 60-8 herringbone cutter with an 8 mm clamping shank with a diameter of 7.9 mm and an angle of 8° for board thicknesses of 3-10 mm.

The 70-8 herringbone cutter with 8 mm clamping shank with a diameter of 9.5 mm and an angle of 8° for board thicknesses of 6-13 mm.

75-8 herringbone cutter with 8 mm clamping shank, diameter 11.1 mm and 8° angle for board thickness 10-16 mm.

The 80-8 herringbone cutter with 8 mm clamping shank with a diameter of 12.7 mm and an angle of 8° is designed for a board thickness of 12-20 mm for open toothing or 19 mm for semi-hidden zinc plating.

Herringbone cutter 90-12 with a 12 mm clamping shank with a diameter of 17.5 mm and an angle of 8° for board thicknesses of 16-26 mm.